API 5L X42 Line Pipes

Hebei Zhongji Is A Premier Supplier For Your API 5L X42 Line Pipes Needs.

Hebei Zhongji carry a large inventory of new, API 5L seamless and welded line pipes for clients in the oil and gas industry. We offer a variety of industry-standard coatings such as Fusion Bonded Epoxy and TGF-3, as well as customer- and application-specific optionsto meet your requirements.

 

With sizes ranging from 1/2” OD to 30” OD,we can meet the requirement of any midstream project, well hook up, or othertransmission needs you may have. Our inventory ranges from API 5L Grade B allthe way up to API 5L Grade X70. We offer scheduled options, including schedule40, schedule XS and schedule 80 as well as non-scheduled sizes.

 

API 5L X42 Line Pipe Sizes

: 1/2″ – 36″ O.D.

API 5L X42 Line Pipe Dimensions

API 5L X42 Line Pipe Weight

Line Pipe Grades

:  API 5L B, X42, X46, X52, X56, X60, X65, X70

API 5L X42 Line Pipe Wall Thicknesses

: Light Wall – Extra Heavy,SCH10 through SCH XXS

 

API 5L X42 PSL1 Line Pipe Chemical Compositions

Chemical Composition of API 5L X42 PSL 1
Mass fraction, based upon heat and product analysis a
Seamless Pipe
C	Mn	P	S	V	Nb	Ti
maxb	max.b	max.	max.	max.	max.	max.
0.28	1.20	0.030	0.030	c,d	c,d	d
Welded Pipe
0.26	1.20	0.030	0.030	c,d	c,d	d

 

       

0.50% maximum for copper, 0.50% maximum fornickel, 0.50% maximum for chromium, and 0.15% maximum for molybdenum.

For each reduction of 0.01% below thespecified maximum concetration for carbon, an increase of 0.05% above thespecified maximum concentration for manganese is permissible, up to a maximumof 1.65%

unless otherwise agreed, the sum of theniobium and vanadium contents shall be ≤0.06%.

The sum of the niobium ,vanadium andtitanium concentratons shall be ≤0.06%.

Unless otheriwse agreed.

unless otherwise agreed, the sum ofniobium, vanadium and titanium concentrations shall be ≤ 0.15%

       

API 5L X42 PSL1 Line Pipe Mechanical Properties

 

Mechanical Requirements
Y.S	T.S	ELONGATION
Mpa(psi)	Mpa(psi)
min	min	min
245(35 500)	415(60 200)	28%

               

API 5L X42 PSL2 Line Pipe Chemical Composition

         

Chemical Composition of API 5L X42 PSL 1 / 2
Mass fraction, based upon heat and product analysis % maximum										Carbon Equivalent A
										% Maximum
Cb		Si	Mnb	P	S	V	Nb	Ti	Other	CEIIW	CEPcm
Seamless & Welded Pipes
L290R OR X42R	0.24	0.4	1.2	0.025	0.015	0.06	0.05	0.04	e	0.43	0.25
L290Q OR X42Q	0.18	0.45	1.4	0.025	0.015	0.05	0.05	0.04	e	0.43	0.25
Welded Pipe
L290M OR X42M	0.22	0.45	1.3	0.025	0.015	0.05	0.05	0.04	e	0.43	0.25

            

Unless otherwise agreed, the sum of thniobium & vanadum concentrations shall be = 0.06%.

Unless otherwise agreed, 0.50% maximum forcopper, 0.30% maximum for nickel, 0.30% maximum for chromium, & 0.15%maximum for molybdenum.

       

API 5L X42 PSL2 Line Pipe Mechanical Properties

 

Mechanical Requirements
Y.S	T.S	Elongation
Mpa(psi)	Mpa(psi)
min	min	min
290(42 100)	495(71 800)	f

                 

The specified minimum elongation shall beas determined using the following equation:    

                 

API 5L X42 Pipe Usage    

American Petroleum Institute standard 5L.API pipes & API 5L X42 PSL 1 / 2 are exclusively used for transmission ofgas and petroleum products.       

                 

API 5L X42 Line Pipe Specification 

API 5L X42	(PSL1)	(PSL2)
Minimum Yield Strength:	42,100 psi	42,100 psi
Maximum Yield Strength:	None	71,800 psi
Minimum Tensile Strength:	60,200 psi	60,200 psi
Maximum Tensile Strength:	None	110,200 psi
Notes: This is a standard line pipe grade specified in API (American Petroleum Institute).

 

       

Click here to request a quote for API 5L X42 Line pipes.